07.23.2020
When a battery bank has been discharged extremely low, select Morningstar controllers will provide this function to keep the batteries at the Absorption voltage for the entire duration of the following charging cycle. This helps reverse any negative effects of the previous abnormally low discharge. Most Morningstar products with this feature allow for customization/disabling of this function.
TriStar MPPT Processor A Firmware Update
v32b Firmware and above addresses EEprom access bugfix causing watchdog trip and subsequent lowside FET turn on. This issue is generally limited to Controllers installed in applications utilizing all, or most, of the following items in the design. -High I/O of Communications, -Read/Write of vb_ref register (0x0033), -Read/Write of ib_ref register (0x0058), -Write of battery current limit (0xE01D), -Coil command restart of controller, -48V Systems, -Oversized Arrays. The following link provides instructions on updating firmware: https://www.youtube.com/watch?v=J6Duwr5Tl-w&t=10s
Browse by product
07.23.2020
TS-MPPT 600V Operator’s Manual
03.04.2020
03.04.2020
TriStar MPPT 60 Processor A Firmware Update (TSMPPT-60 / TSMPPT-60M Only)
11.12.2018
03.18.2021
Prostar Gen 3 Operator’s Manual
02.24.2021
SunSaver Gen 3 Operator’s Manual
12.18.2020
TS-MPPT 150V Operator’s Manual
12.09.2020
Morningstar Communications Document
12.09.2020
TS-MPPT 600V Operator’s Manual
03.04.2020
03.04.2020
TriStar MPPT 60 Processor A Firmware Update (TSMPPT-60 / TSMPPT-60M Only)
11.12.2018