07.23.2020
A solar charge controller is a solar-powered voltage and current regulator. They are used in off-grid and hybrid off-grid applications to regulate power input from PV arrays to deliver optimal power output to run electrical loads and charge batteries. Solar charge converters are also commonly called solar charge regulators. Solar charge controllers maintain batteries at their highest state of charge without overcharging them to avoid gassing and battery damage.
TriStar MPPT Processor A Firmware Update
v32b Firmware and above addresses EEprom access bugfix causing watchdog trip and subsequent lowside FET turn on. This issue is generally limited to Controllers installed in applications utilizing all, or most, of the following items in the design. -High I/O of Communications, -Read/Write of vb_ref register (0x0033), -Read/Write of ib_ref register (0x0058), -Write of battery current limit (0xE01D), -Coil command restart of controller, -48V Systems, -Oversized Arrays. The following link provides instructions on updating firmware: https://www.youtube.com/watch?v=J6Duwr5Tl-w&t=10s
Browse by product
07.23.2020
TS-MPPT 600V Operator’s Manual
03.04.2020
03.04.2020
TriStar MPPT 60 Processor A Firmware Update (TSMPPT-60 / TSMPPT-60M Only)
11.12.2018
03.18.2021
Prostar Gen 3 Operator’s Manual
02.24.2021
SunSaver Gen 3 Operator’s Manual
12.18.2020
TS-MPPT 150V Operator’s Manual
12.09.2020
Morningstar Communications Document
12.09.2020
TS-MPPT 600V Operator’s Manual
03.04.2020
03.04.2020
TriStar MPPT 60 Processor A Firmware Update (TSMPPT-60 / TSMPPT-60M Only)
11.12.2018